Product Page :
GO-RT-N150
Firmware Version : 1.00
Hardware Version : A1
GO-RT-N150
setup
advanced
tools
status
support
Welcome to the D-Link Easy Setup Wizard
The router is detecting your Internet connection type. Please wait until the router provides suitable settings for your configuration
PHYSICAL CONNECTION OF INTERNET PORT IS DISCONNECTED
Please make sure the cable between the ADSL/cable modem and the router is properly connected. The router will try to detect your Internet connection type again.
If you don't want to connect to Internet, please click the button below.
Dial Up
The router is trying to set up the connection again. please wait
Establishing connection ...
The router is trying to connect to Internet. Please wait until the connection is established
DIAL-UP IS FAILED
Please contact your ISP to get the correct username/password.
Configure your internet connection
Internet Connection
:
Dynamic IP (DHCP)
PPPoE
Static IP
What is this?
Host Name
:
Username
:
Password
:
MAC Address
:
*
User Name
:
(* is required field)
*
Password
:
*
IP Address
:
(* is required field)
*
Subnet Mask
:
*
Gateway Address
:
*
Primary DNS Server
:
Secondary DNS Server
:
Address Mode
:
Dynamic IP
Static IP
*
PPTP IP Address
:
(* is required field)
*
PPTP Subnet Mask
:
*
PPTP Gateway IP Address
:
*
PPTP Server IP Address
:
*
User Name
:
*
Password
:
*
Primary DNS Server
:
Secondary DNS Server
:
MAC Address
:
*
Address Mode
:
Dynamic IP
Static IP
*
L2TP IP Address
:
(* is required field)
*
L2TP Subnet Mask
:
*
L2TP Gateway IP Address
:
*
L2TP Server IP Address
:
*
User Name
:
*
Password
:
*
Primary DNS Server
:
Secondary DNS Server
:
MAC Address
:
Configure Your Wireless Network
Network Name (SSID)
:
Security Mode
:
Disable Wireless Security (Not recommended)
AUTO-WPA/WPA2(Recommended)
Network Key
:
:
Auto generate network key
Internet Settings
Internet Connection
:
Status
:
Checking...
Wireless Settings
Wireless Network Name (SSID)
:
Status
:
Unsecured
Security
:
Network Key
:
Your current wireless security setting is not safe. We recommend that your security setting needs to be changed.
Admin Settings
User Name
:
Status
:
Unsecured
Password
:
Your current admin security setting is not safe. We recommand that you can synchronize your admin password with the wireless network key by clicking the checkbox below.
: Set the password of device to wireless network key
: Save my network settings
Login
Login to the router :
User Name
:
admin
Password
:
Enter the correct password above and then type the characters you see in the picture below.
Copyright © 2012 D-Link Corporation. All rights reserved.
